|
| The MojoRTK console does have an A+ option.
I don't know how large of a planter you're talking but I will share some experiences with you. We used to have a guy with AgLeader RTK do custom strip tilling for us. He had a 12 row drawn strip till rig and we had a 16 row planter and the planter tractor had a MojoRTK unit in it. It was very hard to perfectly copy the AgLeader lines with the Mojo.
We would drive to the longest row in the field and then we would drive out in the field a ways to make sure the strip till rig had enough time to get centered on the line before we set our A point. Then we would drive all the way to the other end of the field and do the same thing at the other end before setting our B point. The problem is that when you set your A point it's hard to be perfectly centered and it's not likely that the previous implement was perfectly centered either. So both your A point and your B point can be off even when great care is taken. This results in less than stellar performance.
If you have the heading and the two systems for sure calculate headings exactly the same, that should eliminate much of the difficulty. If they don't, you'll be frustrated. | |
|
How does MojoRTK calculate their AB lines?
