AgTalk Home
AgTalk Home
Search Forums | Classifieds (13) | Skins | Language
You are logged in as a guest. ( logon | register )

New Holland skid loaders, good,bad or ugly?
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
RodInNS
Posted 2/11/2012 10:09 (#2220612 - in reply to #2220166)
Subject: RE: New Holland skid loaders, good,bad or ugly?


Get the wheels off the ground on that side... jack it up on both ends... then see how much slop is in the wheels. I've had the splines wear off the end of the motor shafts on mine... and it starts out as a slip here and there... then a bigger slip... then ZZZZZZZZZZ. and you go nowhere. Basically what happenes is the bolt that retains the pinion shaft to the motor shaft backs out and it gets loose on the tapered spline... then all hell breaks loose.
Beyond that... you may have a problem in the hydro. Is the oil temperature rising quickly? Or is that motor getting hotter than the other?
They also make a pretty deep growling noise when the pumps cavitate or run out of oil... but that should bring on a 30 second shutdown...

Rod
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)