|
| Dont have any pics, but have seen several setups.
One friend has then mounted, vertically of course, to the parallel links that connect the wings and has them set that they stagger when folded up, half set for each side. Also cuts down on some plumbing clutter.
Another was stubbed out straight off the bar behind the cab, but was a pain to get to the transmission with, then he moved it over one row to the right, but beware the hieght interference when folding, cant go too low nor too high. The slickest was in front the bar on each end of the center section, perpendicular to the bar. Sure could see them well, had quick couplings on the inlet and outlets, to take it off when not needed. | |
|