roaming | Trimbleguy - 2/8/2012 16:14
Is there a special cable required for this? I haven't actually seen a Pro700 yet, so I'd like to be prepared when I get to this job - it's 200km to the nearest regional town that might have any resources to make one if I don't have the bits with me!
I know the old ones had pair of 12 pin DTM connectors at the bottom under the shroud, but the Pro700 looks to be a much smaller screen....
The Pro 700 screen size is identical to the Pro 600, but the overall size is smaller. You can just run a serial cable from the NavII to the DE9 on the back of the Pro 700. |
trimble-question for Torn
