|
S.E. Iowa | You might consider putting killem in the tank it is a algeside for diesel. I was having problems with plugged filters. I cut a big hole in the tank with a hole saw and welded a 4 inch nipple in it to clean it out. I then started using killem. I also bought a large filter and canister off of ebay for a hydraulic system. It filters to 10 micron with 30-40gal/min rate. My 10 gpm pump doesnt even come close to taxing the filter. By application the base is used on a c130 aircraft. | |
|
Old diesel in tank - want to change to gasoline
