|
| The 411 is a good machine, me and dad used it for years. Comes in two versions, 540 and 1000 RPM PTO. The 1000 RPM has the PTO direct drive the long driveshaft, but the 540 version has an extra gearbox to increase the speed of the PTO. Check for play on the slipclutch to the gearbox shaft, new bushings are not expensive. On the rear end of the long driveshaft, check for play or looseness of the universal joint yoke on angle gear box shaft, it may have wore out splines on the yoke. The large gearbox that drives the rollers nearly touches the ground, if it leaks at the bottom, a reinforcement strip is available that bolts ontop of the coversheet.
| |
|
nh 411 vs 1411 discbine differences?
