|
![](/profile/get-photo.asp?memberid=8166&type=profile&rnd=375) Brookston, IN | It depends. If the Hiniker servo is a flow meter and servo combo (starflow valve), then no. If it is a stainless steel flow meter (looks like a tube with 3 bolts holding it together), then yes to the flow meter. The servo will only work if it is a 2 wire version. Plug on the servo itself has 3 holes, but only 2 wires in it. If it is not a 2 wire (probably isn't), then that can be replaced with a Hiniker 2 wire servo or Raven or KZ. Agleader has the cable to hook to the Hiniker components. If it has a hydraulic shut-off in the system, then a mechanical switch can be triggered by the butterfly on the hyd valve to put the Agleader in hold.
Edited by kelleyeng 1/11/2012 15:59
| |
|