AgTalk Home
AgTalk Home
Search Forums | Classifieds (68) | Skins | Language
You are logged in as a guest. ( logon | register )

Hypertherm Plasma ????
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
jimcolt
Posted 12/12/2011 18:18 (#2099152 - in reply to #2096570)
Subject: Re: Hypertherm Plasma ????


If you do not cut the thickest materials....and produce a long arc..then the 65 will operate on less than 44 amps. The input current rating is assuming you are cutting the maximum severance thickness....which draws the most power.

Jim Colt Hypertherm

Thud - 12/11/2011 06:29

http://www.hypertherm.com/en/Products/Mechanized_Plasma/Systems/Air... If I read the specs right, if you are on a 240V circuit then the 65 will draw 44amps. So 60 amp breaker??? or could you get by with a 50amp?
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)