Posted 11/2/2011 12:56 (#2030309 - in reply to #2030110) Subject: Re: Pro 700 NMEA Output to JD2600
I did a couple radar cals. on the 2600, it kept saying calibration unsuccessful, Data strings should be correct, GGA, VTG, RMC. The 2600 did have fixed DGPS. On the Pro 700, in the NMEA output setup, there is a absolute speed, is that supposed to be on or off? Ended up putting his 2600 globe on top, everythings seems to be working. I would like to eliminate that globe if possible.
Pro 700 NMEA Output to JD2600
