|
SW Iowa | I believe the 100% is how much the injection voltage is trying to put fuel in. If the ECM commands full fuel, its 100% and the injectors are wide open, but if there is not enough fuel to fully inject, it only gets a partial shot.....but the injector and computer says its a max power. Some of the earlier tractors do not monitor fuel pressure(depending on the software package) so the ECM may not know there is a fuel pressure problem.
I have never had a customer or demo that the potential customer was not impressed by the power of the C9 in an MT. They just plain have guts. Too bad you didn't get a fair demo.
Michael | |
|
Disappointed with Challenger MT765 demo (pics)
