|
Chillicothe, Missouri | I do not have any experiance in plowing with the wire in tall trash, but I have discussed it with individuals before.
-I was told it was best to attach the wire to the rolling cutter mount, and then trail by the moldboard that the cutter is for.
-Also I believe that the wire would be best if trailing past the moldboard approx. 5 feet
-I was told that it was best to use heavy wire, approx 1/8" in diameter
Edit:
each moldboard would have a wire on it.
example: three bottom plow would have three wires, one for each molboard
Edited by detroitdiesel 10/17/2011 12:40
| |
|