|
Winkler, Manitoba Canada | We are somewhat independant. No dealers involved other than as parts suppliers. I ordered the required parts from several different dealers and we put it together. So far with the Leica system you do not need a dealer for calibration of any of the components. If you have a reasonable understanding of hydraulics and can use an ohm meter to reverse engineer an existing wiring harness this project is quite doable. A 2388 should be easier to do as Raven has a kit listing for it. I would think Trimble might also have a install kit for it.
Edited by WTW 10/13/2011 23:47
| |
|
Leica Autosteer on TR99 Pics
