Posted 10/10/2011 08:59 (#1998010 - in reply to #1997327) Subject: Re: 2394 powershift--electrical issue
MN
You can check if the selinoids are getting power by using washers or
a screw driver to see if they are magnatized. When in first power shift
check C1,C2,C6 Second powershift C1,C2,C5 Third C1,C3,C6 Fourth C1,C3,C5
Fifth C2,C3,C6 Sixth C2,C3,C5 Reverse C2,C4,C6. Beyond this I haven't had
to dig much deeper into my 2394 yet. Just guessing but it looks like C5
is used in PS 2,4 and 6. Good luck
2394 powershift--electrical issue
