|
Manitoba, Canada | To get a swath map go to Toolbox -> Layout. Find a run screen you want to use and find Swath Map 1x4.
What is the Pro600 in? Tractor/Combine? Makes a difference as to why you may or may not be seeing anything on your Map page.
If its in a combine it should be mapping anytime you are harvesting. Touch on the Map screen area it should rotate between coverage/yield/moisture/fuel econ. Or on the top right of the Map area there is a little box (cant remember what it says Options maybe) you can press to show settings for the Map.
If its in a Tractor, set your Toolbox > Impl. to Hitch type if you are using 3pt or EHR1 if you are using remote #1 for toolbar raise/lower. Your Map should then show coverage when you have your implement in the ground. For this to work the 600 needs to be linked to the A-Post, if the 600 shows fuel economy and power usage you should be ok. Sometimes the 600 wont sync with he apost and you have to manual get it to.
This is all depending on what version you have in the 600 also. | |
|
Pro 600 Mapping??
