|
east central georgia | If you are talking about the belt de-clutcher that disengages the belts when the tailgate is up, you will probably have to replace both pieces of the clutch to get it to work correctly. If you pull it with a tractor with at least a 16gpm hyd pump you can weld the clutches together and the only difference after you do that is that the belts won't stop when the tailgate is up. The new NH bales do not have that clutch anymore. You can buy the parts for the new balers and install on the older balers to do away with the clutch but again...be sure that your tractor hyd are good enough to get the tailgate up quickly or the belts will drag on the net and cut it. | |
|
NH BR 7090 slip clutch
