Posted 9/9/2011 15:49 (#1954453 - in reply to #1954448) Subject: Re: CIH 162 receiver on 7010 Pro 600
roaming
The 162 is likely connected to the display via CAN. You can grab an RS232 signal from the 162 to take to the Integra. Under the righthand console is a 10-pin Metripack connector where you can access the RS232 Tx line.
BTW, the Pro 600 can do both yield mapping and variety tracking now, so no need for the Integra.
CIH 162 receiver on 7010 Pro 600
