|
| Hello! Please help me solve the problem, if you have a wiring diagram BEELINE AUTOGUIDE, and user manual for this product. My antenna is working, there is a link with the satellite, and BEELINE works. But on the screen of the device the message NO COMMS. The wires are checked, no damage, but no signal on the instrument. I have a tractor MT765B, the system of the tractor, too, the wires are not damaged, I can not understand what was happening. I still can not understand what this device RE207311, it is connected via wire to the antenna. On the monitor of the tractor when I put the switch in function of the autopilot on the screen displayed is not installed. I spent exeperimental, moved the antenna and the monitor BEELINE, another tractor FENDT, everything works, and put back in 765, does not work. Help please
 (3.jpg)
 (4.jpg)
 (6.jpg)
 (7.jpg)
 (8.jpg)
 (200820114830.jpg)
 (200820114832.jpg)
Attachments
----------------
 3.jpg (74KB - 590 downloads)
4.jpg (34KB - 503 downloads)
6.jpg (25KB - 536 downloads)
7.jpg (83KB - 496 downloads)
8.jpg (55KB - 511 downloads)
200820114830.jpg (35KB - 516 downloads)
200820114832.jpg (36KB - 559 downloads)
| |
|
Anyone familiar with Beeline Autoguide?
