|
Central Minnesota | very back of the pump, next to your oil filter, you'll have a small plate... 4 bolts on it... Takes a 10mm wrench... Take those bolts out.. Inside there you will see a long "screw" with a jam nut on it... loosen that nut, and turn your screw IN.... 1 turn sure won't hurt... Depends on the pump, but i'm sure 1 turn on that pump, which probably has 11mm plungers is probably only about 30-45cc's of fuel... But not exactly sure... You could very easily go more. But careful... Your injectors will be the limiting factor on how much fuel you can safely go before you wreck your pump... Just remember that IN is more OUT is less when it comes to fuel... | |
|
turning up 4430 for tractor pull
