|
Manitoba, Canada | Off the top of my head it should be close to this....
Configuration -> GPS -> Diagnostisc -> AgRemote button at bottom of screen
When you get into AgRemote:
- Sometimes AgRemote can be a bit laggy so press the button and wait for a second if the screen doesnt change when you hit a button.
- Hit the Right Arrow twice from the Home screen (the one that tells you satellites and DGPS status)...should take you to the Config Menu.
- Press Down once, then Right once should bring up the DGPS Config menu.
- Press Down until you find the convergance option.
- To edit the converg number press Right until it starts blinking, then press Up/Down to edit.
- Hit Enter to accept.
| |
|
hopefully simple question
