|
Fargo, ND | I misunderstood what you were originally asking.
You will be able to do that.
Set it to AutoSlope mode and fine survey density, open a field, go to the survey screen, set it to Section Line and hit the record button. Drive the tile line, then go to the scraper screen and hit the design button and look at the design. Now you can see what paramaters will work for that tile run. You can play with optimum depth, minimum slope, minimum and maximum depth if the original design doesn't work.
You can tap anywhere on the profile and see the slope, depth, elevation and distance down the run at that point. | |
|
field level II ?
