Near Intersection of I-35 & I-90 Southern Mn. | kylereiss - 7/6/2011 15:36
Installed a cab cam onto a 750 today. cut 4 pin connector off. used pin 7,8, and 9 in a 12 pin deutch connector. plugged into port A on 750. works fine. the only problem i have is the picture is inverted on 750 (left is right and right is left). cant find any menu for camera options in the 750. on the cab cam display the is a button to invert the picture. has anyone else experienced this problem? any solutions?
Did the same thing but didn't have a chance to use it. I was going to use it to help hook up NH3 tanks on a pull-type bar but we didn't use the bar this Spring due to weather delays. I thought mine was correct as far as the inversion business but now I'm not so sure.
Are you trying to use this as a backup camera where it would need to be inverted or are you using it in a forward direction? There is no menu choice on the 750 to do an inversion like there is on the original cab cam monitor. |
750 and Cab Cam
