|
WY, OK | Pretty much all I have been doing these last few days. We have a Bobcat 773 with a bobcat digger w/ a few different sized augers. Only trouble I have is with large rocks and these last few days with layered clay, but both of those are problems for any digger. In clean soil I can dig a hole in under 30 seconds 4' down, the auger will suck its way down they dig so good. You'll need to keep all 4 tips nice and sharp and the pilot piece needs replacing every few years if you dig a lot. According to Bobcat yours is 11gpm and our 773 is 15, I am betting 11 will work just fine. I've also dug a few dozen holes for a buddy with a 24" auger, worked just fine. We used to have a 3pt auger and I miss it maybe once a year on very special circumstances.
Also found this on those Belltec diggers:
http://www.wctractor.com/NEW%20PAGES/Belltec%20post.html
Looks like a 150 or 200 would work flow wise. | |
|