Hagen Brothers farms,Goodrich ND | Mize - 6/1/2011 20:25
Lights up and flashes "O" on every function. Repaired some rat damage already but am unsure as to the location of the rotor speed sensor. Have only chased wires directly under instrument pannel thus far.
The rotor speed sensor is at the front of the combine just above the feeder housing (toothed wheel on rotor and sensor on front panel.)
The mice took out all monitor function on both my 1480's. On both machines it was the monitor cable chewed off below the tool box. remove that cab panel to the right of the cab door and take a look, bets thats where the problem is. Mice seem to leave the rest of the wiring alone. |
1460 IH questions
