Posted 5/4/2011 08:08 (#1760465 - in reply to #1760312) Subject: Re: Insight - no flow meter pulses, harness was pinched but...
Thanks, I'm able to push water out to the booms (boom valves work) and I can vary the volume using the manual up/down arrows in run mode. I'll see if I have another raven adapter harness and swap it out (the harness that goes from the modules to the raven main harness). I'm doing the paperclip test on this harness (should be about 2' of harness until reaches the module - nothing else in between).
Insight - no flow meter pulses, harness was pinched but...
