Near Intersection of I-35 & I-90 Southern Mn. | jthyde - 5/1/2011 17:15
We are not getting NEMA from the 500 through the NAV II to the insight.
Cable (turck BSM 19-995-0.3 u08171) from auxillary port of 500 to P3 connector on NAV II main harness
out of NAV II small harness laptop port to NULL modem cable to display cable (4001608) for insight
500 settings
NEMA out aux port
38,400
Parity None
8 decimal places
GDA = 1 hz
VTG = 1 mz
little green led by laptop port blinks rapidly (instructions say 6X per sec = OK)
IDEAS??
I have been successful with my own 500 and Nav II and an Insight. I now traded for a 750 again with the same Nav II and the same Insight. When I switched to the 750, I didn't make any wiring changes to that portion of the system.
I believe my settings are NEMA out at 19,200 with GGA and VTG On @ 5 Hz. These settings are under the Autopilot tab.
Edited by tedbear 5/2/2011 07:49
|
500, Insight, NAV II
