|
W. Illinois | http://stellarsupport.deere.com/en_US/support/pdf/om/en/ompfp10808_...
Using Implement Receiver for
Documentation and Coverage Map
When using iGuide guidance mode, the documentation
and coverage map will use the implement receiver
position as a reference point.
When iGuide is not in use and the implement receiver
is connected to the CAN bus, the system will use the
implement receiver position for documentation and
coverage map purposes.
NOTE: If you are not using iGuide guidance mode and do
not want to use the Implement Receiver position as
a reference point for documentation and coverage
map, unplug the implement receiver from the CAN
Bus. After unplugging the Implement Receiver from
the CAN Bus, the GreenStar Display will use the
Machine Receiver position as a reference point
for documentation and coverage map.
Page 25-3 in the manual.
| |
|
Swath Control with iGuide
