Near Intersection of I-35 & I-90 Southern Mn. | Concerning wiring the ON/OFF valves. If you have a Raven wiring harness involved at all, be aware that Raven always uses White wires for ground. This is in contrast to most other OEMs that use black.
This means that if you connect a Raven harness to a different brand of ON/OFF valve that the Raven white (ground) will usually need to go to the other guys black. Many other valve companies (Banjo and others) will use the white wire on the valve side as the ON/OFF trigger.
For boom 1, this means that the Raven white goes to the Banjo black. Raven red goes to Banjo red. Black is Raven's trigger for boom 1 so it goes to the Banjo white.
For Boom 2, Raven white goes to Banjo black. Raven red goes to Banjo red. Brown is Raven's trigger for boom 2 so it goes to the Banjo white.
This process is continued for the remaining valves.
If you are using the Deere 37 pin to Raven 16 pin adapter, the ground for the valves is on Pin 1 and constant power on Pin 16 on the 16 pin end. |
Greenstar rate controller - grounding ? - connecting boom valves
