|
Northeast Nebraska | You could be right, I guess. My manual is at the shop, so I can't look at it. But, if thats what it says I would go ahead and give it a try.
I take it that you are using a pressure compensated rate control. On mine, I am using a flow meter to tell it the flow. I added the pressure sensor just to know where I was at.
Raven sells 2 different harness, one ready for a flow meter, and one ready for a pressure transducer. If you have the harness that is ready for the pressure transducer, I would just hook it all up and not worry about it. I bought the 16 pin to 37 pin adapter harness to join my Raven wiring to the Rate Controller wiring.
Call if you want to know more (402) 360-0068
Dewey | |
|
GS2 Rate Controller pressure transducer
