|
| I just converted a customer from a Microtrak 3405 to an EZ-boom system. I was first told that I would need just a short adapter (12in long) to convert from the microtrak harness to the EZboom/Raven connections. I later found out later that I needed the full harness kit to convert the system. This harness ran right around 700 dollars.
I have not been out to calibrate the system, but after installing the harness and plugging the EZBoom into the system everything appears to be working properly. Customer is running and EZ Guide 500 w/ EZsteer and adding the EZboom this spring, all firmware is current. | |
|
Trimble 500,ezboom, Spray coupe w Micro trac moninter questions
