|
| You are right. Currently if a nav controller is Trimble branded, it will not work with a Pro600 and a CNH branded nav will not work with a EZ Guide Plus or 500/750 display.
CaseIH is coming out with Accuguide All Makes http://www.caseihafs.com/accuguide.php that will allow the Pro600 to operate Trimble Autopilot kits which you would need in your SPX3320 and STX380.
The farmers in our area are planting with the Magnum and sometimes spraying with the SPX at the time so they want an operating system in each.
If you want autoguidance in both the STX and SPX, put in Trimble platform kits in each, then move the Trimble branded nav and display (EZ Guide Plus for now) to the unit that you want to use. Autopilot configurations for the two should be saved and restored when needed. I'd leave the Magnum as it is for now until the Pro600 Accuguide All Makes supports the STX or SPX autopilot kits in the future, then you may decide to use that display in those units if needed. | |
|
Autopilot or Accuguide...?
