|
Southern IL | I saw those posts on page 5 and was going to email u. My gsa ,gga, and rmc enabled. on the 2600 all u need to do is go to com settings and name profile select com 1 and choose serial?
I am getting signal from navII. can u change the 8 bit to 6 and enter the RTK in the rawnemaoutputmaxquality from the fm1000 or fmx or do i have to configure navII using toolbox. also i am told that the data cable supplied by trimble when u get a fmx or a 442 reciever is a null modem cable and then all i would have to do is use gender changers to connect the two monitors?
Thank u for your reply. I appreciate it.
John S.
| |
|
FMX to GS2600 gps signal for recording purposes only procedure?
