|
ECIN | I was originally trying to setup an Insight to output through the NavII port; now it is an FmX, also through the NavII port. The support note and Deere manual said to set at 5Hz, so that is where this one is.
One item that Tom N cleared up for me was that in the support document, the parameter RawNMEAOutputMaxQuality needs to be set to the letters "RTK" if you are running on RTK corrections (the way it reads, I thought it was supposed to be set to "2").
Running down the road, the FmX/2600 appeared to be working correctly (GPS showed up like I thought it would in the 2600 diagnostics). However, we are wet here, and I HAVE NOT yet had this out in the field to play with the row command/swath control and coverage mapping.
One last thing, it appeared like the 2600 was not seeing the GLONASS satellites that were showing up on the FmX.
Let us know how it works in the field! | |
|
JD Sprayer with Trimble RTK for documentation
