Near Intersection of I-35 & I-90 Southern Mn. | Yes, this is the standard cable from Raven. I can't tell exactly from the picture but I see one more pin that I might normally expect. There was some confusion on some sprayers as to where the system picked up the power to operate the valves. Some took it from Pin 16 which is always hot. Some took it from Pin 14 which is hot only when the console Power is On.
The Deere 37 to 16 adapter cable (I'm not familiar with it since we always make our own) should do the trick.
If the valves don't operate properly check the power situation that I mention above. One pin may need to be moved. |
JD rate controller won't work on my sprayer says salesman??
