|
| I know the 20 have it for shure possibly switched during the 10 series don't know for shure but on the 00's the idler/boggy wheels are a pain in the butt to change because it is like taking a hub apart to change the boggy wheel, drain the oil, make shure the seal is good (they cost over a 100 bucks for a pair) and change the races/bearings and eveything where on the newer one the boggies bolt on just like a normal tire as the bearings/hub all stay attached to the tractor much much easier to change. Dennis SEND
Edit: I forgot they could have been changer over to the new style but it was quite costly so very unlike it has been done on very many tractors. Dennis SEND
Edited by Dennis SEND 3/23/2011 00:32
| |
|
JD 8420T vrs 8400T
