Viewing a thread - Putting the C15 back together...need some help

Forums | Classifieds (2) | Skins | Language

You are logged in as a guest. ( logon | register )

Putting the C15 back together...need some help	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Posted 3/17/2011 21:52 (#1675887 - in reply to #1675858)
Subject: Re: Putting the C15 back together...need some help

Iowa

If you have the connecting rods, with two dowel pins and holes(between cap and rod), THEN the dowels go to the front of the engine.

Top of the page

Bottom of the page

Putting the C15 back together...need some help - IH-Harvester : 3/17/2011 21:20
- Serial number, please or at least the "prefix" - CATGUY : 3/17/2011 21:28
- cylinder head specs - CATGUY : 3/17/2011 21:35
- main bolt spec and spray jets spec - CATGUY : 3/17/2011 21:38
- Re: Putting the C15 back together...need some help - IH-Harvester : 3/17/2011 21:39
  - C15 "6NZ" rod bolt spec - CATGUY : 3/17/2011 21:45
    - RE: C15 "6NZ" rod bolt spec - CATGUY : 3/17/2011 22:10
- Re: Putting the C15 back together...need some help - IH-Harvester : 3/17/2011 21:44
  - Re: Putting the C15 back together...need some help - CATGUY : 3/17/2011 21:52
    - Re: Putting the C15 back together...need some help - TxPope : 3/17/2011 22:04
      - Re: Putting the C15 back together...need some help - CATGUY : 3/17/2011 22:24
- oil pump mounting bolt spec - CATGUY : 3/17/2011 22:02
- Re: Putting the C15 back together...need some help - IH-Harvester : 3/17/2011 22:08

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)