|
NE SD | Joe, our tractor has high flow hydraulics so it has two scvs on top of a cast piece where there is two power beyond ports, then three more outlets on top of another cast piece with two more power beyond ports. The left,ports are pressure, right ports return to tank. We are using the upper ports to power the VR motors on our planter because we couldn't get the correct fitting to get the seep line out of the way of the lower ports on this tractor. Past tractors have had the lower ports only.
Pressure has never been a problem. These motors do have their own flow control valves though. I think your idea of using a valve to limit flow to the max you will need is probably a good idea. | |
|
Can we talk power beyond circuits
