|
southern Illinois | Thanks , I do not have a schematic for it and I would like one if you can find one.
I have switched several relays with no luck. One thing that I did notice when I was testing things, One of the 4 connectors under k3 when grounded though the tester would make the dash light and k1 and 2, which are the flashers, would all work. No relay was installed just testing the connectors with a test light from connector to ground. The blower under relay 4 wouldn't work but when I removed that relay and tested it the same way one connectors would run the blower but not any of the other three relays.
I have checked all three ground points on the tractor but I would like to know where the board grounds at.
thanks
Edited by commissioner 3/8/2011 21:55
| |
|
John Deere electric problems.
