|
| The latest model 3275HT has the tier III cummins and is 6.7 L displacement. The 5.9 was good but the bigger displacement is better as it has more torque for the same power and the 14% larger displacement means it has bigger balls and hangs on better. If hill climbing an issue go the 02 wheel motor cams - high torque option - gives 20% more torque than 00 cams.
The Nitro uses either the Raven 460 or 4600 - your preferance. Can even fir Viper or Envizio etc if you want steering straight from the factory.
If you are getting spray all over then you can't be doing a great job of spraying either. There was a tread on here with a JD tracked machine with frount mounted Fast sprayer and they said machine contamination was no issue. With the clearance of the Nitro it should be a lot better than tracked tractor.
Ride is good, better on big fat tyres if they suit your application.
Plus they can do this. 1 honeybee and 1 macdon
Jono
Edited by jono 6/19/2007 04:53
(IMG_0411.jpg)
(IMG_0358.jpg)
Attachments ---------------- IMG_0411.jpg (106KB - 823 downloads) IMG_0358.jpg (114KB - 622 downloads)
| |
|
- Miller Nitro sprayer owner and operators,,,,,,,,,, - Curt Keiser : 6/16/2007 23:52
- RE: Miller Nitro sprayer owner and operators,,,,,,,,,, - Guest : 6/17/2007 08:46
- Re: Miller Nitro sprayer owner and operators,,,,,,,,,, - Rod! : 6/17/2007 15:46
- Re: Miller Nitro sprayer owner and operators,,,,,,,,,, - T800 : 6/17/2007 16:28
- Re: Miller Nitro sprayer owner and operators,,,,,,,,,, - breken : 6/17/2007 17:39
- Re: Miller Nitro sprayer owner and operators,,,,,,,,,, - tmrand : 6/18/2007 08:27
- Re: Miller Nitro sprayer owner and operators,,,,,,,,,, - jono : 6/19/2007 04:39
|