|
| So you are saying that you picked up your GPS signal from your Autofarm system? Could your Insight do the same thing as that system?
I used a Trimble 332 receiver and paid for a GPS signal. We have the outside rows as individual shutoffs and we thought that Waas might start shutting off rows when it shouldn't.
Did you use your "user defined mode" setup? Or run minimum skip? We were late in getting our system going so we were fine tuning the system during the planting season. We started in the minimun skip mode and finished up in user defined 65%.
We put 16 Tru count air clutches on the planter so we are setup on the planter to control each row if Agleader gives us that chance.
Edited by midwest 6/15/2007 08:22
| |
|
AL Insight-Kinze-planter monitor?
