Dietrich, Idaho and Mountain Home, Idaho | SOFT RESET:
1. Power down the display and then power it on.
2. Wait until the status bar at the bottom of the second startup screen is over half full.
3. Press the power button and top brightness control button at the same time.
4. Hold the buttons down until the display beeps.
HARD RESET:
1. Power down the display and then power it on.
2. Wait until the status bar at the bottom of the second startup screen is over half full.
3. Press the power button and both brightness control buttons at the same time.
4. Hold the buttons down until the display beeps. |
Problems with 750 touch screen and calibration
