|
| We built this rack as a master tool center for the shop. The pegs will hold multiples of each size so if someone brings a wrench or socket back and not sure which set it belongs in its hung here and sorted later.
The less cluttered side has 3/4 drives at the bottom and metrics above. We've posted the SAE sizes above the metric in relation to where they are compared to the metrics sizes. Helps us to get the proper sized socket since we don't have a full set of metrics. Should do the same on the SAE side.
Seems like some pegs accumulate more than others. Always come up short 1/2---9/16---3/4--- and 15/16. Got plenty of 5/8---11/16---13/16---and 7/8
 (IM000276.JPG)
 (IM000277.JPG)
 (IM000278.JPG)
 (IM000279.JPG)
Attachments
----------------
 IM000276.JPG (45KB - 105 downloads)
IM000277.JPG (43KB - 107 downloads)
IM000278.JPG (36KB - 96 downloads)
IM000279.JPG (32KB - 106 downloads)
| |
|
Wheeled tool rack (pics)
