Viewing a thread - Drill bit sharpening

You are logged in as a guest. ( logon | register )

Drill bit sharpening	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Tom Russell

Posted 6/11/2007 06:32 (#161003 - in reply to #160947)
Subject: RE: Ditto what John says

McLeod County Minnesota

Same here! I bought a Drill Doc earlier this year and sharpened bits that had been dull for many moons. Now every drill bit around the place will work in mild steel.

Drill bit sharpening - McCartman : 6/10/2007 23:02
- Buy your own Drill Dr. - John : 6/10/2007 23:21
  - Ditto what John says - Cowboycorn : 6/10/2007 23:32
    - RE: Ditto what John says - Tom Russell : 6/11/2007 06:32
  - RE: Buy your own Drill Dr. - Jules : 6/11/2007 07:10
  - Re: Drill bit sharpening - Russell : 6/11/2007 09:01
    - Re: Same here Russell - boog : 6/11/2007 09:51
      - Re: Drill bit sharpening - HT67 : 6/11/2007 21:31
        
        Re: Drill bit sharpening - nefarmer : 6/11/2007 23:40
- RE: Drill bit sharpening - NVDave : 6/11/2007 06:51
  - Re: Drill bit sharpening - Ed Winkle : 6/11/2007 07:58
    - Re: Drill bit sharpening - NVDave : 6/11/2007 12:43
      - Re: Drill bit sharpening - Ed Winkle : 6/11/2007 14:50
- RE: Drill bit sharpening - Greg77 : 6/11/2007 09:01
  - Greg answered your question, but........... - Cowboycorn : 6/11/2007 09:20
- Cheap jig for sharpening bits (pics) - Skipper : 6/11/2007 20:43
  - RE: Cheap jig for sharpening bits (pics) - plowboy : 6/11/2007 21:46
    - Learned to sharpen in Vo-Ag - shade : 6/12/2007 17:38
- Re: Drill bit sharpening - Larry in AB : 6/12/2007 18:23

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)