|
Lapel, In | Done my share too, but I prefer to use the old 1/4 turn on the pressure valves and 1/8 turn on the return valves. Its a lot easier and quicker with fewer lickovers in my opinion than it is using a dial indicator. You can make your own adjustment jig using the cover cap #27 in the parts shown.Hardest part is drilling and tapping a hole on angle for the hydraulic detent. Same home made jig will aalso work on both the older 10 series and 20 series SCvs. | |
|
Adjusting SCV's, JD 4250
