|
Eastern Iowa | I'm sure that your sprayer did not come with this upgrade as it is something that they have just been testing this week. It is an add on that they brought out to our farm and installed. I'm not sure if they will sell the equipment that they brought out to our place or if they are going to make some changes within the motor head of the ball valve so that there isn't any additional hardware to mess with. I would try contacting TeeJet for that answer. Unless your running an automated boom control system, you shouldn't run into any ball valve problems anyway. If you are using an automated boom control system, keep as close of an eye as you can on those spray sections ON THE BOOM not on the Insight. When a ball valve fails, it doesn't show that it is turned off on the Insight screen. Same condition when the ball valve has failed in the on position. Insight doesn't recognize that its still on when direct command has turned all the sections off. You can be sitting stationary with direct command off, master and all individual boom sections off and the failed ball valve boom section will continue to spray. | |
|
Fix for Teejet Ball valves tripping internal reset
