|
Cedar Rapids, Iowa | There aren't any official solutions from JD. JD is doing everything they can to make sure you don't use anything other than their base stations. They certainly aren't providing a serial port that you can push RTCM correction data in to.
The Leica MojoRTK can emulate an iTC on SF1, and the Mojo can also run on network RTK. I've heard a few people say they're doing this and were quite happy with it.
There was some other system (that I can't think of the name of) that would convert the correction data into whatever format JD receivers use, then broadcast that data out a 900MHz radio so that the 900MHz radio on the receiver could pick it up. Basically it was spoofing a JD base station. This solution requires a fair bit of extra hardware to work around the JD limitations, and I don't recall seeing anyone post on here saying how well it was working.
Deere's marketing department is phenomenal.
-Lance | |
|
CORS network
