The Original Lock Springs Rver Rat | Ron the best solution I came up with was to just buy an old NH3 bar with coulters and mount thin liquid knives to the standard shanks.We bought a Yetter 1600 gallon all wheel steer wagon to pull behind same as you would if running an NH3 tank.We use a hypro pump mounted below the tank and a little Spraymate controller,works well over a wide speed range. A good pump and three inch hose is about the best you can do to fill,maybe there is something better?
Edited by Don NMO 6/3/2007 10:34
|
Liquid 28% sidedress applicators
