|
Shelby, MT | I have the crappy flex control. I don't like the auto rate but it always seems to come out at the end of the tank load.
I have figured out my min and max for pressure than I can go. When I speed back up I think it should recover faster and the tune doesn't seem to help it no matter what number it is on. If I don't get the return I want I will just bump up the rate a .1 or .2/gal and it recovers faster then I return it down. I adjust my hydraulics as the oil warms up. I try to keep around 62psi give or take a few. As the oil warms up things change... I run the 4 gal orange combo jets. and spray 35-60psi and try for 40-50 range but go up if need.
I have gotten good at shutting the switch off at end or pass or put on manual before I turn around. Then I don't have the no recovery problems.
what do you do, what problems? | |
|
case ih srx160 pull type sprayer
