Near Intersection of I-35 & I-90 Southern Mn. | If the Raven Sidekick console were to be used with an Injection pump then several of these can be stacked together.
For example, if a Raven 450 was used as the controller for the carrier, a Raven Sidekick console can be stacked on top of it. If another product was desired a second Sidekick console could be added. This process could be continued.
In this type of arrangement each console is living in its own world controlling its own product. The cabling allows the Sidekick consoles to "know which sections are ON" so that they can do their job appropriately.
Having a bunch of Sidekick consoles stacked up in the cab could work (keeping in mind the possible speed situation described below) but might take the term "cab clutter" to new highs. Using a single display that is able to work with several products (which was probably the intent of the original post) would be much cleaner. In this type of setup the modules that actually control the various pumps are usually mounted on or near the pumps themselves.
Edited by tedbear 1/2/2011 06:46
|
How to run multiple Raven SideKicks?
