|
SW Ohio | That would be me!
After using it some I realize the teeth are too close together and it rakes up too much dirt, I forget but I think I have 2-2 1/2" between teeth and more would be better except it will miss more rocks. Notice i made one wheel depth adjustable to keep it level in the ground. I used a JD 200 series reel drive motor and most of the time it has enough power but you can stall it. I already had the rods for teeth (engineering by inventory!!) but some 1/2 by 2 or three flat sock would probably work better.
 (rrake2crop2 (558 x 276).jpg)
 (rrake8crop 3(750 x 300).jpg)
 (rrake9croppped3 (750 x 323).jpg)
Attachments
----------------
 rrake2crop2 (558 x 276).jpg (34KB - 209 downloads)
rrake8crop 3(750 x 300).jpg (42KB - 196 downloads)
rrake9croppped3 (750 x 323).jpg (48KB - 214 downloads)
| |
|
Homebuilt rock rake
