|
Rochester, IL | I would try to order it with out the planter monitor or harnessing. even the SM300 has an option for can bus modules for 4 rows, which means you will have to get a new main wiring harness. the Seed Sensors are 3 wire DJ high rate seed sensors no matter what option you have, but it will probably have the seed sensors feeding back to 4 row can bus modules which are then chained together. I don't think they have an option for a standard monitor with a 37 pin connector at the hitch and dedicated signal wire to each row, which is what is required by, trimble, ag leader (except for vansco sensors i.e. kinze's), precision planting, or Dickey-john. | |
|
Setting Up Insight on New White 8222 Planter
